MASONARY COMPOUND
SUPER STRONG PRODUCT
A floor screed is usually a cementitious material made with a higher ratio of cement to sand. It may be applied onto either a solid in-situ concrete ground floor slab or onto a precast concrete floor unit.
Main Features
SIMCRETE FLOOR SCREED consists of cement, dried sand, additives, and polymers, which is suitable for a top coat over concrete slab, roofing etc.
Features & Benefits
Designed to meet the exacting needs of masonry professionals
- Ready to use product just requiring the addition of clean water
- Quality premixed product specifically formulated for screeding applications
- Excellent workability
- Designed to ensure a smooth finish
- This Screed mix is designed to retain moisture to assist a natural hydration process especially at warm to hot temperatures.
Applications
Top coat over concrete slabs, floors, roofs, etc
Packaging
Product available in 40kg bags
One 40kg bag of simcrete floor screed requires approximately 18 – 20% by weight of pure water to provide a workable mix.
@ 20-25 mm thickness – 10 sq.ft coverage
Product Specification
Composition
Product Specification
Mechanical / Physical Properties
| Property | Type | Details |
|---|---|---|
| Tensile Adhesion Strength | Dry | 1460 N |
| Wet | 1233 N | |
| Compressive Strength | @ 28 days | 16.4 N/mm2 |
| POT LIFE | 250 minutes | |
| OPEN TIME | 20 minutes |
Composition
COMPOSITION
| Sl | Type | Details |
|---|---|---|
| 1 | Mortar (Graded Sand & Cement) | 93-95% |
| 2 | Additive 1 | 5% |
| 3 | Additive 2 | 0.4% |
| 4 | Polymer | 0.4% |
- Tips & Tutorials
- Inspiration gallery
Directions for use
- Place the required amount of Drymix Floor Screed into a mixer or onto a non-absorbent surface.
- Add potable water gradually ensuring that it does not wash away any cement and mix thoroughly to ensure an even and consistent mix
- Surface must be free of dust/loose particles, grease, mould oil, rust metal, wood peels, paints and plastics.
- Pre-wetting of substrate: Surface must be dampened/moistened before the application of Floor Screed. Ensure there is no stagnant or frequent water flow on substrate while applying the screed.
- The material should be applied within 1 hour of preparation. The Screed can be applied to the required thickness by a manual method
- All tools and equipment should be cleaned with water after use. Do not re-temper the mortar if it stiffens. Discard the stiffened product and make a new mix.
- Curing of the Screed must be done by creating check bunds for water stagnation, for a minimum period of 1 (one) week.
- Tips & Videos
- Inspiration gallery
Latest Posts
- BLOG
Why Simcrete?
It is convenient to use, just add water
• Resistant to abrasion
• Has a carrying capacity for heavy loads
• Can be applied on concrete floor surfaces or on compacted ground surfaces
• Consistency of mixture is maintained
• Resistant to abrasion
• Has a carrying capacity for heavy loads
• Can be applied on concrete floor surfaces or on compacted ground surfaces
• Consistency of mixture is maintained
- Watch our video
Clients List
Testimonials
"After using Simcrete Wall Plaster in one of our project , all I can say is, this product is simply awesome, and above standards of other brand. Try it and you'll love it!"
sreedar reddy
Project Head
"After using Simcrete Wall Plaster in one of our project , all I can say is, this product is simply awesome, and above standards of other brand. Try it and you'll love it!"
Paras Shah
Purchase Manager
