MASONARY COMPOUND
SUPER STRONG PRODUCT
Jointing Mortar is a thin layer of mortar applied over the AAC or Fly ash masonry blocks. It is a thin set mortar used to join AAC blocks.
DRYMIX
AAC JOINTING MORTAR
Main Features
SIMCRETE AAC BLOCK MORTAR consists of cement, dried sand, additives and polymers which is suitable for AAC block laying application.
Features Benefits
Designed to meet the exacting needs of masonry professionals- Ready to use grey cement based non-shrink, self- curing, water resistant mortar for fixing AAC blocks, Concrete blocks, fly ash bricks, etc. Ready to use product just requiring the addition of clean water
- This quality premixed product is specifically formulated for jointing applications
- Excellent workability
- Designed to ensure a smooth finish
- AAC Block Mortar is designed to retain moisture to assist natural hydration process especially at warm to hot temperatures
Applications
- AAC Block to Block Bonding
- CLC Block Bonding
- General Block Bonding applications
Packaging
Product available in 40kg bags
One 40kg bag of AAC Jointing mortar mix requires approximately 20% by volume of pure water to provide a workable mix.
60 – 68 Blocks @ 3-5mm thickness, ~100 sq.ft coverage ( For 8” Block)
Mechanical / Physical Properties
| Property | Type | Details |
|---|---|---|
| Tensile Adhesion Strength | Dry | 1440 N |
| Wet | 1000 N | |
| Compressive Strength | @ 28 days | >13.6 N/mm2 |
| POT LIFE | 225 minutes | |
| OPEN TIME | 90 minutes |
COMPOSITION
| Sl No | Type | Details |
|---|---|---|
| 1 | Mortar ( Cement & Graded Sand) | 93-95% |
| 2 | Additive 1 | 5% |
| 3 | Additive 2 | 0.3% |
| 4 | Polymers | .0.7% |
- Tips & Tutorials
- Inspiration gallery
Directions for use
- Place the required amount of Dry-Mix AAC Block Mortar into a mixer or onto a non-absorbent surface.
- Add potable water gradually ensuring that it does not wash away any cement and mix thoroughly to ensure an even and consistent mix
- Form a mortar bed of approximately 3 to 5 mm thick end to end
- Place the AAC Block on the bed of mortar and remove any mortar that may be squeezed out when the AAC Block is placed and smoothen the joint. Any gaps that become apparent must be filled with mortar allowing the mortar to dry.
- All tools and equipment should be cleaned with water after use.
- Do not re-temper the mortar if it stiffens. Discard the stiffened product and make a new mortar.
- Factory sealed bags of this product are guaranteed to be of first quality for one (1) year if stored off the ground in a dry non-damp area.
- Tips & Videos
- Inspiration gallery
Latest Posts
- BLOG
Why Simcrete?
A thin coat cement-based adhesive jointing mortar specially designed for better bonding of AAC blocks, Cellular light Weight concrete (CLC) blocks, and solid / hollow blocks. Simcrete Jointing Mortar is a high-quality factory-made dry mix of special polymer additive with high-grade cement, sand and other fillers
- Watch our video
Clients List
Testimonials
